GUIDE:- CONNECT ALL FOUR
- CONNECT ALL FOUR
Materials Needed: Stacked Plastic Sheets #1-#4, Measuring Tape, Scissors, Marker, Gorilla Tape
Move to the door side (top) – Start taping sheets #2 & #3 together:
- Fold sheet #4 back for now.
- Line up the edges of Sheet #3 & Sheet #2
- Fold the tape over from Sheet #3 and attach to Sheet #2.
- Tape the entire length.
- Smooth out the air bubbles as much as possible.
Move down taped Sheets #3 & #2 a tad to reveal Sheet #1:
- Fold back sheet #4 and tape to sheet #1
- Line up edges and fold the tape over from sheet#4 and attach to Sheet #1.
- Smooth out the air bubbles as much as possible.
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/01-1.jpg)
Move to the fan side (bottom) – Start taping Sheets #4 & #3 together:
- Line up the edges of Sheet #4 & Sheet #3.
- Fold the tape over from Sheet #3 onto #4 and tape the entire length.
- Smooth out the air bubbles as much as possible.
Once you’ve taped these together – Do the same for Sheets #2 & #1.
- Line up edges of Sheet #2 and fold the tape over and attach to Sheet #1.
- Tape the entire length.
- Smooth out the air bubbles as much as possible.
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/Connect-F-01.jpg)
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/Connect-F-02.jpg)
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/Connect-F-03.jpg)
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/Connect-D-01.jpg)
GUIDE:- ACCORDION FOLD
- ACCORDION FOLD
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/accordian-6.jpg)
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/accordian-1.jpg)
Take Sheet #4 and fold the FAN side edge up towards the DOOR side edge revealing Sheet #2
- You are looking to manipulate Sheets #3 and #1 leaving Sheet #2 on top of the stacked pile and Sheet #4 on the bottom.
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/accordian-3.jpg)
Pull up the center (taped edge) between Sheets #2 & #3.
Fold Sheet #3 in on itself with the edges of Sheet #2 & #4 meet.
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/accordian-4.jpg)
Do the same for Sheet #1.
- Fold Sheet #1 in on itself with the edges of Sheet #2 & #4 meet on the fan side.
- Smooth out the middle folds
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/accordian-5.jpg)
![](https://multibubble.livefreelab.com/wp-content/uploads/2020/09/accordian-7.jpg)
Bubble Assistants: Seth Blume, Heather Wooldridge, Armando Minjarez, Ellie Keppy, and Arietta Austin